Creating Compatible Contracts

Use custom logic to allow Chainlink Automation to determine when to execute your smart contract functions.

Learn how to make smart contracts that are compatible with the AutomationCompatibleInterface contract and its functions. To understand the best practices when working with Chainlink Automation, click here.

Example contract

To use Chainlink Automation, contracts must meet the following requirements:

• Import AutomationCompatible.sol. You can refer to the Chainlink Contracts on GitHub to find the latest version.
• Use the AutomationCompatibleInterface from the library to ensure your checkUpkeep and performUpkeepfunction definitions match the definitions expected by the Chainlink Automation Network.
• Include a checkUpkeep function that contains the logic that will be executed off-chain to see if performUpkeep should be executed. checkUpkeep can use on-chain data and a specified checkData parameter to perform complex calculations off-chain and then send the result to performUpkeep as performData.
• Include a performUpkeep function that will be executed on-chain when checkUpkeep returns true. Because performUpkeep is external, users are advised to revalidate conditions and performData.

Use these elements to create a compatible contract that will automatically increment a counter after every updateInterval seconds. After you register the contract as an upkeep, the Chainlink Automation Network simulates our checkUpkeep off-chain during every block to determine if the updateInterval time has passed since the last increment (timestamp). When checkUpkeep returns true, the Chainlink Automation Network calls performUpkeep on-chain and increments the counter. This cycle repeats until the upkeep is cancelled or runs out of funding.

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;

// AutomationCompatible.sol imports the functions from both ./AutomationBase.sol and
// ./interfaces/AutomationCompatibleInterface.sol
import "@chainlink/contracts/src/v0.8/AutomationCompatible.sol";

/**
 * THIS IS AN EXAMPLE CONTRACT THAT USES HARDCODED VALUES FOR CLARITY.
 * THIS IS AN EXAMPLE CONTRACT THAT USES UN-AUDITED CODE.
 * DO NOT USE THIS CODE IN PRODUCTION.
 */

contract Counter is AutomationCompatibleInterface {
    /**
     * Public counter variable
     */
    uint public counter;

    /**
     * Use an interval in seconds and a timestamp to slow execution of Upkeep
     */
    uint public immutable interval;
    uint public lastTimeStamp;

    constructor(uint updateInterval) {
        interval = updateInterval;
        lastTimeStamp = block.timestamp;

        counter = 0;
    }

    function checkUpkeep(
        bytes calldata /* checkData */
    )
        external
        view
        override
        returns (bool upkeepNeeded, bytes memory /* performData */)
    {
        upkeepNeeded = (block.timestamp - lastTimeStamp) > interval;
        // We don't use the checkData in this example. The checkData is defined when the Upkeep was registered.
    }

    function performUpkeep(bytes calldata /* performData */) external override {
        //We highly recommend revalidating the upkeep in the performUpkeep function
        if ((block.timestamp - lastTimeStamp) > interval) {
            lastTimeStamp = block.timestamp;
            counter = counter + 1;
        }
        // We don't use the performData in this example. The performData is generated by the Automation Node's call to your checkUpkeep function
    }
}

Compile and deploy your own Automation Counter onto a supported Testnet.

1. In the Remix example, select the compile tab on the left and press the compile button. Make sure that your contract compiles without any errors. Note that the Warning messages in this example are acceptable and will not block the deployment.
2. Select the Deploy tab and deploy the Counter smart contract in the injected web3 environment. When deploying the contract, specify the updateInterval value. For this example, set a short interval of 60. This is the interval at which the performUpkeep function will be called.
3. After deployment is complete, copy the address of the deployed contract. This address is required to register your upkeep.

To see more complex examples, go to the utility contracts page.

We will now look at each function in a compatible contract in detail.

Functions

checkUpkeep function

This function contains the logic that runs off-chain during every block as an eth_call(link) to determine if performUpkeep should be executed on-chain. To reduce on-chain gas usage, attempt to do your gas intensive calculations off-chain in checkUpkeep and pass the result to performUpkeep on-chain.

Because checkUpkeep is only off-chain in simulation it is best to treat this as a view function and not modify any state. This might not always be possible if you want to use more advanced Solidity features like DelegateCall(link). It is a best practice to import the AutomationCompatible.sol(link) contract and use the cannotExecute modifier to ensure that the method can be used only for simulation purposes.

function checkUpkeep(
  bytes calldata checkData
) external view override returns (bool upkeepNeeded, bytes memory performData);

Below are the parameters and return values of the checkUpkeep function. Click each value to learn more about its design patterns and best practices:

Parameters:

• checkData: Fixed and specified at upkeep registration and used in every checkUpkeep. Can be empty (0x).

Return Values:

• upkeepNeeded: Boolean that when True will trigger the on-chain performUpkeep call.
• performData: Bytes that will be used as input parameter when calling performUpkeep. If you would like to encode data to decode later, try abi.encode.

checkData

You can pass information into your checkUpkeep function from your upkeep registration to execute different code paths. For example, to check the balance on an specific address, set the checkData to abi encode of the address. To learn how to create flexible upkeeps with checkData, please see out flexible upkeeps page.

function checkUpkeep(
    bytes calldata checkData
) public view returns (bool, bytes memory) {
    address wallet = abi.decode(checkData, (address));
    return (wallet.balance < 1 ether, bytes(""));
}

Tips on using checkData:

• Managing unbounded upkeeps: Limit the problem set of your on-chain execution by creating a range bound for your upkeep to check and perform. This allows you to keep within predefined gas limits, which creates a predictable upper bound gas cost on your transactions. Break apart your problem into multiple upkeep registrations to limit the scope of work.

  Example: You could create an upkeep for each subset of addresses that you want to service. The ranges could be 0 to 49, 50 to 99, and 100 to 149.

• Managing code paths: Pass in data to your checkUpkeep to make your contract logic go down different code paths. This can be used in creative ways based on your use case needs.

  Example: You could support multiple types of upkeep within a single contract and pass a function selector through the checkData function.

performData

The response from checkUpkeep is passed to the performUpkeep function as performData. This allows you to perform complex and gas intensive calculations as a simulation off-chain and only pass the needed data on-chain.

You can create a highly flexible off-chain computation infrastructure that can perform precise actions on-chain by using checkData and performData. Both of these computations are entirely programmable.

performUpkeep function

When checkUpkeep returns upkeepNeeded == true, the Automation node broadcasts a transaction to the blockchain to execute your performUpkeep function on-chain with performData as an input.

Ensure that your performUpkeep is idempotent. Your performUpkeep function should change state such that checkUpkeep will not return true for the same subset of work once said work is complete. Otherwise the Upkeep will remain eligible and result in multiple performances by the Chainlink Automation Network on the exactly same subset of work. As a best practice, always revalidate conditions for your upkeep at the start of your performUpkeep function.

function performUpkeep(bytes calldata performData) external override;

Parameters:

• performData: Data which was passed back from the checkData simulation. If it is encoded, it can easily be decoded into other types by calling abi.decode. This data should always be validated against the contract's current state.

performData

You can perform complex and broad off-chain computation, then execute on-chain state changes on a subset that meet your conditions. This can be done by passing the appropriate inputs within performData based on the results from your checkUpkeep. This pattern can greatly reduce your on-chain gas usage by narrowing the scope of work intelligently in your own Solidity code.

• Identify a list of addresses that require work: You might have a number of addresses that you are validating for conditions before your contract takes an action. Doing this on-chain can be expensive. Filter the list of addresses by validating the necessary conditions within your checkUpkeep function. Then, pass the addresses that meets the condition through the performData function.

  For example, if you have a "top up" contract that ensures several hundred account balances never decrease below a threshold, pass the list of accounts that meet the conditions so that the performUpkeep function validates and tops up only a small subset of the accounts.

• Identify the subset of states that must be updated: If your contract maintains complicated objects such as arrays and structs, or stores a lot of data, you should read through your storage objects within your checkUpkeep and run your proprietary logic to determine if they require updates or maintenance. After that is complete, you can pass the known list of objects that require updates through the performData function.

Vyper example

You can find a KeepersConsumer example here. Read the apeworx-starter-kit README to learn how to run the example.